Garage Sectional Door in UAE
- Made in China
- Height : 2.50 meters.
- Width : 5.50 meters.
Specifications:
1. Torsion spring mechanism
2. U-shaped end support bracket
3. Top profile
4. Vertical track
5. Support with roller and roller holder
6. Vertical angle
7. Side cap
8. Spring safety device
9. Universal mounting bracket for horizontal tracks
10. Top support bracket
11. Top sealer
12. Hinge
13. Sandwich panel
14. Latch lock (optional)
15. Bottom bracket
16. Bottom profile with weather seal
17. Handle
Checking Dimensional Details:
All the necessary measurements are taken inside the premises with just a measuring tape and a water level.
Every dimension should be taken at least in three points:
H : opening height (distance from floor to opening top);
B : opening width (distance between left and right side of the opening);
h : headroom (distance between opening top and ceiling) min 150 mm;
b1/ b2 — left/right side room clearance (distance between a corresponding opening edge and obstacle) min 120 mm;
L : backroom.
When measuring Н and В the largest figure is taken for final dimension.
When measuring h, b1, b2 and L the smallest figure is taken for final dimension.
There are no reviews yet.